Chitti app logo

Chitti is better in the app

Coins, streaks and builds — free on Android & iOS

Get the app
Chitti logoChitti

Filament Installation

3 Minutes · Module 4 - Printing Procedure

How to change filament in a 3D printer for students, covering preheating, removing, and installing filament. A Tamil technology lesson.

  • Heating the nozzle and print bed using the preheat PLA setting
  • Pressing the extruder lever to safely pull out the old filament
  • Trimming the filament at 45 degrees and feeding it to the nozzle
What this lesson teachesRead the lesson as text

Filament installation is the process of safely replacing the plastic strand used as printing material in a 3D printer. Because melted plastic cools and locks firmly inside the nozzle and extruder, the printer must be properly heated and prepared before old filament can be taken out and new filament can be fed in.

Heating and removing the old filament

  • A solid filament strand cannot simply be pulled out by hand because it is locked inside the extruder and nozzle.
  • Turning on the printer displays the current temperatures of both the nozzle and the print bed on the user interface screen.
  • Selecting the preheat PLA setting under the prepare menu heats the nozzle and print bed from zero degrees Celsius up to the required printing temperature.
  • Once the nozzle reaches the correct temperature, pressing the lever on the extruder loosens the grip so the old filament can be pulled out and rolled up for storage.

Preparing the new filament edge

A new roll of filament usually has a flat, blunt tip that cannot easily pass into the narrow opening of the extruder. Placing the strand on a cut-proof mat and trimming the tip at a sharp forty-five-degree angle with a cutter creates a pointed edge. This angled cut allows the filament to enter the feed mechanism and guide tube without getting stuck.

Feeding the new filament into the printer

  • The new spool of filament is first placed securely onto the printer filament holder.
  • Holding down the extruder lever allows the pointed tip of the filament to slide into the extruder entry hole.
  • Turning the rotary knob moves the filament forward through the guide tube toward the hot nozzle.
  • As the strand travels through the tube, it eventually reaches the nozzle, where it cannot move forward any further.
  • The user can tell the filament has reached the nozzle because the rotary knob tightens and resists turning.

Part of the course

3D Printing

View course →

More in Module 4 - Printing Procedure

  1. 1Filament InstallationNow playing
  2. 2Bed Level2 Minutes
  3. 3Memory Card & Printing Initialsation3 Minutes