Chitti app logo

Chitti is better in the app

Coins, streaks and builds — free on Android & iOS

Get the app
Chitti logoChitti

Bed Level

2 Minutes · Module 4 - Printing Procedure

Learn 3D printer bed leveling for students, exploring how to adjust corner wheels and use a paper gap. A Tamil technology lesson.

  • Why bed leveling prevents layer shifting in 3D printing
  • Using corner wheels to raise or lower the print bed
  • Testing the gap between the nozzle and bed with paper
What this lesson teachesRead the lesson as text

Print bed leveling is the process of adjusting a 3D printer bed so that it sits at an even height across its entire surface. Setting the print bed to a uniform level ensures that the nozzle maintains the correct spacing, which stops printing failures like layer shifting from ruining a model.

Why bed leveling matters

When a print bed is not leveled before a print starts, the printer can suffer from a problem known as layer shifting. High-end 3D printers often provide an automatic bed leveling feature that levels the bed at the press of a setting. Standard printers without automatic systems require manual adjustments across the platform to keep every part of the print stable and properly aligned.

Adjusting corner wheels

  • Four circular adjustment wheels sit underneath the four corners of the print bed.
  • Rotating a corner wheel clockwise raises the bed higher toward the nozzle.
  • Rotating a corner wheel anticlockwise lowers the bed downward away from the nozzle.
  • Adjusting each of these four wheels manually changes the height of that specific corner.

Testing the gap with paper

  • The nozzle of the printer is used as the reference point to check the height at each corner.
  • The nozzle is pulled over until it lines up directly with the center point of the corner wheel.
  • A sheet of paper is placed flat in the gap between the bed and the nozzle.
  • The wheel is turned clockwise until there is just enough space for the paper to slide between them.
  • Repeating this check on the remaining three sides ensures the nozzle has the exact same clearance everywhere.

Completing the setup

After all four corners of the bed have been manually adjusted with the paper test, the leveling task is finished. The printer must then be sent to its auto home command. Running auto home returns the print head and bed to their original starting positions so the machine is ready for a 3D model.

Part of the course

3D Printing

View course →

More in Module 4 - Printing Procedure

  1. 1Filament Installation3 Minutes
  2. 2Bed LevelNow playing
  3. 3Memory Card & Printing Initialsation3 Minutes