Why Does Tubelight Flicker?
3 Minutes
Why tubelights flicker explained for students: learn how fluorescent tubes, ballasts, and starters work together. A Tamil science lesson.
- Parts inside a tubelight: argon gas, mercury, and filaments
- How the ballast and the starter bimetallic strip boost voltage
- Why heat buildup causes flickering and modern electronic ballasts
What this lesson teachesRead the lesson as text
A fluorescent tubelight flickers when turned on because it requires a burst of high voltage and enough heat energy to start, which often takes more than one attempt. The starter and ballast work together in rapid cycles to build up this energy, producing the brief flashes known as flickering.
Parts inside a tubelight fixture
- The glass tube contains argon gas along with mercury, and its inner surface is coated with a chemical called phosphorus.
- Filaments at both ends of the tube heat up to release electrons, causing chemical changes that make the phosphorus coating glow with light.
- Four contact pins connect the tube to the mounting frame, commonly called a batten (batti).
- The batten holds two critical starting devices: an inductive ballast and a starter containing a bimetallic strip.
How the ballast and starter trigger ignition
When the switch is turned on, alternating current heats the filaments and enters the starter. The current heats the bimetallic strip inside the starter, causing the metal to bend and break electrical contact. This sudden break forces the magnetic field inside the ballast to collapse immediately, generating a massive surge of high voltage. That high voltage rushes to the filaments, heating them intensely and forcing them to emit electrons into the tube.
Why the light flickers before glowing
The heat energy released during the first attempt is usually not enough to keep the tubelight operating. The bimetallic strip quickly cools, reconnects, and bends open again, triggering another high-voltage discharge from the ballast so the accumulated heat can sustain the glow. The rapid flashes between these starting cycles are the flickers we see. If the starter is faulty, the ballast cannot collapse its magnetic field properly, leaving the tubelight stuck in continuous flickering.
Why modern lights do not flicker
Older tubelight systems depend on a mechanical starter with a bending metal strip to ignite the lamp. Newer tubelights replace both the starter and the traditional choke with an electronic ballast. Because an electronic ballast provides the required ignition voltage directly and electronically, the tube lights up instantly without any flickering delays.
More lessons
- Why Do Earphones Pin Have These Rings?
- Why Do CCTV Cameras Have LEDs?
- Why Does Samosa’s Inside Stay Hot for a Long Time?
- Why Earth Pin Is Fat and Long?
- Why the Wore “Quartz” Is Mentioned in Clocks?
- Why Do Newspapers Print These Four Colour Dots?
- Why Does Table and Ceiling Fan Rotate in Opposite Direction?
- Why Do We Eject Pendrives?