Chitti app logo

Chitti is better in the app

Coins, streaks and builds — free on Android & iOS

Get the app
Chitti logoChitti

Why Ground Nuts Are Fried in Sand

7 Minutes

Roasting groundnuts in sand: explore heat transfer and fluidized bed combustion for students. A Tamil science lesson.

  • Roasting peanuts in an iron pan at high and low heat
  • How sand acts as a fluid medium to heat peanuts evenly
  • Using fluidized bed combustion to burn coal at Neyveli
What this lesson teachesRead the lesson as text

Groundnuts are roasted in sand because hot sand surrounds each nut completely, distributing heat evenly across its entire surface without burning it. When stirred in a hot pan, sand behaves like a fluid, roasting the nuts much faster and using less fuel than roasting them directly on bare metal.

Problems with direct roasting

  • When peanuts are heated directly on an iron pan at high flame, the small contact area causes them to char on the outside while remaining raw inside.
  • Lowering the flame prevents burning and roasts the nuts evenly, but requires constant stirring.
  • Roasting on low heat also takes a long time and wastes large amounts of cooking fuel.

How sand improves roasting

Sand heats up quickly with very little energy compared to water. When continuously stirred in a pan, sand acts as a fluid medium, which is a substance that flows and covers objects easily. This uniform contact transfers moderate heat to all sides of the nut at once. As a result, the nuts cook evenly and quickly while consuming very little gas.

Fluidized bed combustion in power plants

The same scientific principle is used in circulating fluidized bed combustion boilers to generate electricity. In conventional power plants, coal must be ground into a fine powder, dried, and burned at extreme temperatures between 1300 and 1500 degrees Celsius. In a circulating fluidized bed boiler, crushed coal is mixed with a bed material made of sand, ash, and limestone. High-velocity air blown through holes at the bottom lifts the particles so they float and behave like a fluid.

Benefits of the fluidized system

  • Neyveli Lignite Corporation uses two 250-megawatt circulating fluidized bed combustion units built by Bharat Heavy Electricals Limited.
  • Coal only needs to be crushed to a rough size rather than finely ground and dried.
  • The circulating bed burns fuel evenly at lower temperatures between 800 and 900 degrees Celsius.
  • Burning coal at lower temperatures saves fuel, lowers costs, and produces electricity efficiently.

More lessons

Browse all lessons →