Chitti app logo

Chitti is better in the app

Coins, streaks and builds — free on Android & iOS

Get the app
Chitti logoChitti

Why T-shaped Pipe Is Used on Water Tanks?

4 Minutes

Air pressure and water tank pipes explained for kids through a simple bottle experiment and everyday plumbing. A Tamil science lesson.

  • Testing water flow from a bottle hole with the cap open and closed
  • How air pressure differences stop or allow water to pour out
  • Why water tanks need a T-shaped pipe to ensure smooth tap flow
What this lesson teachesRead the lesson as text

A T-shaped pipe on an overhead water tank is a plumbing vent that allows outside air into the pipeline so water can flow freely out of taps. It prevents a difference in air pressure from locking water inside the system when the main water tank is sealed with a lid.

The bottle experiment

When a plastic bottle is filled with water and punctured near the bottom with a needle, water immediately squirts out through the opening. If the bottle is tightly sealed with its screw cap, the water stops flowing almost instantly. Once the cap is removed, air enters the top of the bottle, and water resumes pouring steadily through the hole under the pull of gravity.

How air pressure differences work

Inside a sealed bottle full of water, there is very little air, which creates low air pressure (alutham). The surrounding atmosphere contains far more air, producing a much higher air pressure on the outside. Air always tends to move from regions of high pressure toward regions of low pressure. Because the outside air presses hard against the tiny puncture hole to push inside, it blocks the water from escaping until the pressures balance out.

Why water tanks need a T-pipe

  • Water storage tanks on roofs must be kept closed with a secure lid so that dust and dirt do not contaminate the water.
  • If the tank and pipes are completely sealed off from outside air, the plumbing system behaves just like the capped plastic bottle.
  • Without an inlet for air, lower pressure inside the line stops water from flowing freely through household taps.
  • A vertical pipe with a T-shaped connector at the top is attached to the pipeline beside the tank to let outdoor air enter.
  • This open air vent equalises the pressure inside the pipes with the outside atmosphere, allowing gravity to pull water down to every open tap.

What happens if the vent is blocked

Covering or plugging the open ends of the T-shaped pipe immediately cuts off the supply of air into the pipeline. When air cannot enter the system to replace the moving water, the internal pressure drops, and water stops running from open taps below. Uncovering the pipe vent instantly restores airflow, balances the air pressure, and allows water to pour smoothly once again.

More lessons

Browse all lessons →