Total Internal Reflection
4 Minutes · Module 3 - Light
Total internal reflection for students, demonstrating how to bend a laser beam inside water using a simple home experiment. A Tamil science lesson.
- Comparing a bent wooden skewer to bending a straight laser beam
- Mixing Dettol in water and shining a laser at changing angles
- Seeing the beam reflect inside water and the refraction science
What this lesson teachesRead the lesson as text
Total internal reflection is an optical effect where light travelling through a medium such as water bends at the boundary and reflects completely back inside instead of passing out into the air.
Bending light like a stick
A wooden skewer is straight, but it can be bent and broken at an angle by hand. A laser beam also travels naturally in a straight line. While light cannot be snapped like wood, shifting the beam at changing angles through water can make the straight beam bend sharply inside the liquid.
Experiment setup and steps
- Pour water into a clear beaker or glass cup, and place another beaker beneath it to raise the height.
- Add a small amount of Dettol into the water and stir it thoroughly using a straw.
- Mix until the liquid becomes a light whitish solution, taking care not to add too much.
- Shine a laser pointer from below the container up into the solution.
- Switch off the room lights to observe the glowing path of the laser beam clearly.
How the beam behaves inside water
As the laser shines upward through the cloudy water, tilting the light source gradually changes the angle of the beam. Light naturally bends, or refracts, when it moves from water into air. As the angle of the laser is increased, the bending angle changes until the light runs almost level with the surface of the water. Tilting the beam past this point prevents the light from exiting into the air, forcing the beam to bend all the way back down into the water.
Why total internal reflection happens
Total internal reflection occurs when light travelling from water toward air hits the surface beyond a certain angle. At lower angles, the beam simply bends as it escapes into the air through refraction. When the angle is tilted sufficiently, the refraction turns into internal reflection. The water surface then behaves like a mirror, keeping the entire laser beam contained inside the liquid.
Part of the course
Science Foundation