Prusa Slice (Support)
6 Minutes · Module 5 - Complex Structure
PrusaSlicer 3D printing for students covers scaling, infill density, patterns, and adding a brim. A short technology lesson in Tamil.
- Opening the Groot model in PrusaSlicer and scaling it down to 50%
- Adjusting fill density and testing triangle and honeycomb patterns
- Adding a brim to hold the base firmly and exporting the G-code file
What this lesson teachesRead the lesson as text
Slicing a 3D model in PrusaSlicer is the process of converting a digital design into machine instructions by setting its size, internal fill, and bed adhesion. This software prepares the object layer by layer so a 3D printer nozzle can accurately construct it out of filament.
Printer setup and scaling
Before adjusting advanced settings, basic print parameters must match the physical machine and material. The software is checked to ensure it is configured for a Creality Ender 3 version 2 printer, PLA filament, and a layer thickness of 0.20 mm. After loading the model file onto the virtual build plate, its placement is set to the center. If the original design is too large, it can be scaled down to 50 percent using numerical input boxes or the on-screen move and scale icons.
Configuring infill density and patterns
- Infill controls how much material fills the inside of the printed object rather than leaving it completely hollow or solid.
- Objects meant only for display need low infill, such as 10 percent, while mechanical parts subject to stress need higher infill for stability.
- Slicing software allows fill density to be adjusted anywhere between 5 percent and 100 percent.
- Different internal geometries can be selected, including grid, triangle, stars, cubic, and 3D honeycomb patterns.
- Testing a 90 percent density with a 3D honeycomb pattern produces tightly bonded internal cells, whereas a 10 percent triangle pattern leaves large open spaces inside.
Inspecting slices and adding a brim
After clicking the slice button, a slider on the screen allows a layer-by-layer inspection of the model from the bottom to the top. This preview shows the exact path the printer nozzle will follow and verifies the internal pattern. Taller prints can shake or lose grip as higher layers are laid down, so a brim is enabled. A brim creates an extended flat layer around the base that holds the object firmly to the print bed throughout the printing process.
Exporting the G-code file
- Once the infill pattern, fill density, and brim are confirmed, the model is sliced one final time.
- Slicing converts the visual 3D model into toolpaths that the printer hardware can interpret.
- The finished layout is saved by exporting it as a G-code file, which can then be transferred directly to the 3D printer.
Part of the course
3D Printing
More in Module 5 - Complex Structure
- 1Prusa Slice (Support)Now playing
- 2Print (Pause & Resume)2 Minutes