Chitti app logo

Chitti is better in the app

Coins, streaks and builds — free on Android & iOS

Get the app
Chitti logoChitti

How Tower Cranes Lift Heavy Weights Without Collapsing?

7 Minutes

How tower cranes work for students: explore how they are built, controlled, and balanced using moments. A Tamil science lesson.

  • Concrete base, mast sections, climbing unit, and counterweights
  • Inside the operator cabin, joystick controls, and walkie-talkie
  • A seesaw animation showing force, distance, and balanced moments
What this lesson teachesRead the lesson as text

A tower crane lifts heavy weights without collapsing because it is anchored into a deep concrete foundation and balanced by counterweights using the scientific principle of moments. The turning force created by a lifted load on one side must never exceed the balancing turning force on the other side.

Building the crane

  • A deep pit is dug at the construction site, where the base of the crane is fixed with steel and poured concrete.
  • Cuboid steel structures called mast sections are stacked on top of the base using a mobile crane.
  • A climbing unit uses a hydraulic arm to push the top section upward so new mast sections can be inserted as the building grows.
  • For very tall skyscrapers, the mast is tied directly to the building structure to provide extra support and stability.

The jib and cabin controls

The horizontal arm on top of the crane is called the jib, consisting of a working jib with a moving trolley and an opposite counter jib holding heavy counterweights. High above the ground, the crane operator sits in a cabin equipped with two joystick control units. These joysticks let the operator hoist cables, slide the trolley along the arm, and rotate the crane clockwise or counterclockwise. The cabin also includes an emergency button, an on-off switch, a voltage meter, and a walkie-talkie to communicate with workers on the ground.

Balancing through moments

A moment is the turning effect calculated by multiplying force by distance from the pivot, just like on a playground seesaw. In the crane, lifting a weight far out on the working jib creates a large moment that could tilt the structure over. To maintain balance, the moment on the working jib must stay balanced against the moment created by the counterweights on the counter jib. Because the counterweights cannot shift further back, the crane operator must keep heavier loads closer to the cabin where distance is short, guided by meter markings along the jib to avoid triggering an alarm.

More lessons

Browse all lessons →