How to Check Gas Level Using Water?
6 Minutes
Checking gas cylinder level for students: see how water and evaporation can reveal the amount of LPG remaining. A Tamil science lesson.
- Liquefied propane and butane stored under pressure in LPG
- Pouring water on a cylinder to detect liquid gas by evaporation
- Using warm water to feel the temperature difference across levels
What this lesson teachesRead the lesson as text
The level of fuel inside a liquefied petroleum gas (LPG) cylinder can be checked without any meter by pouring water down the outside surface and observing how it behaves. The boundary between the dry and wet patches reveals exactly how much liquid gas remains inside.
Inside an LPG cylinder
- LPG consists of a mixture of 40 percent propane gas and 60 percent butane gas.
- The gas mixture is cooled and compressed under high pressure until it turns into a liquid.
- A full cylinder contains about 80 to 85 percent liquid, leaving the remaining space at the top filled with gas.
- Using the stove allows the liquid to evaporate into gas, gradually emptying the liquid reserve over time.
Checking with water evaporation
Pour regular water down the outer metal surface of the cylinder from top to bottom and wait a few moments. The water covering the upper part dries and evaporates quickly, while the water covering the lower part stays wet much longer. Liquid LPG inside the cylinder draws heat away from the outer wall, cooling the water and preventing it from evaporating easily. Where only gas fills the upper section, heat from the surrounding air allows the water molecules to evaporate rapidly.
Checking by touch using warm water
Pouring mildly warm water down the cylinder allows the fuel boundary to be found by hand. Running a palm down the wetted surface reveals a distinct difference in temperature. The upper portion where gas is present feels warm to the touch, while the lower portion where liquid sits feels noticeably cold. The cold line marks the exact height of the liquid fuel remaining inside the cylinder.
Important safety rules
- Use only mildly warm water and never boiling water on the cylinder.
- Pouring very hot water causes the liquid LPG inside to absorb excess heat and turn into gas, dangerously increasing cylinder pressure.
- Avoid performing warm water tests frequently, and only use this method when checking the fuel level is truly needed.
More lessons
- How to Make a Simple Motor?
- How to Avoid Pressure Cooker Accidents?
- How Do Satellites Stay in Orbit Without Falling into the Earth?
- How to Charge Your Mobile Phone in 5 Seconds?
- How to Prepare Carbon Dioxide Gas?
- How Electric Iron Box Works?
- How Touch Screen Works?
- How to Unlock Your Car Using Water?