Basic Shape
2 Minutes · Module 3 - Designing Software
Tinkercad 3D modeling for students shows how to design a cube with a hole using basic shapes and alignment. A Tamil tech lesson.
- Starting a new project and resizing a box to 50 mm
- Aligning a cylinder to the center of the cube
- Using hole and group options to cut through the shape
What this lesson teachesRead the lesson as text
Tinkercad is an online 3D modeling tool used to design three-dimensional objects by adding, resizing, aligning, and combining basic shapes.
Setting up the basic cube
To create a basic cube, start a new project on the project page in Tinkercad and give it a name such as cube. Drag a box shape from the basic shapes collection onto the workplane. The default size of 20 mm is changed to 50 mm so that it forms a cube. The shape can then be checked from different camera angles, including the top view and the right view, to verify its dimensions.
Aligning shapes in the center
To make a hole through the cube, drag a cylinder from the basic shapes menu onto the design. Match the height of the cylinder to the 50 mm height of the cube. Move the cylinder roughly into the middle of the cube, then hold down the Shift key while clicking to select both objects at the same time. Open the alignment tool at the top and click the center dot to align the cylinder precisely in the middle of the cube.
Creating the hole using group
Once the cylinder is aligned in the middle, select the cylinder and click the hole option. Next, select both the cube and the cylinder together again using Shift and click. Click the group option at the top to combine the two shapes. This action cuts a hollow hole right through the center of the cube, which can be viewed clearly from the top view.
Preparing for 3D printing
Tinkercad saves work automatically because it is an online tool, allowing designs to be safely reopened and edited anytime. After finishing a model using basic shapes, it cannot be fed directly into a 3D printer. The completed 3D design must first be processed through slicing software before it can be printed on a 3D printer.
Part of the course
3D Printing
More in Module 3 - Designing Software
- 1Thinker Cad2 Minutes
- 2Create New Design2 Minutes
- 3Basic ShapeNow playing