3D Print
4 Minutes · Module 6 - Print your Super Hero
3D printing an Iron Man model for kids: learn how to change filament, print using an SD card, and remove supports safely. A Tamil technology lesson.
- Changing the filament by preheating the nozzle to 200°C
- Loading the G-code file from an SD card to print the design
- Using a scraper and nipper to safely remove the print and supports
What this lesson teachesRead the lesson as text
3D printing is a manufacturing process that builds a physical object layer by layer from a sliced computer file using melted plastic filament. Completing a 3D print involves heating the nozzle to load the material, running the G-code instructions on the machine, and carefully removing both the model and its temporary support structures.
Changing the filament
Before starting a new print, the printer nozzle must reach the right temperature so that filament can move freely. Inside the printer menu, selecting the prepare section and choosing the preheat PLA setting heats the nozzle up to 200 degrees Celsius. Once this 200-degree mark is reached, the old filament can be pulled out safely from the extruder. The new filament is then threaded into the feed mechanism until it reaches the hot nozzle, ensuring the printer is loaded and ready.
Starting the print
- The 3D model is sliced and converted into a machine-readable G-code file on a computer.
- This file is copied directly onto an SD card, which is then ejected from the computer and inserted into the 3D printer.
- Selecting the print option from the machine screen allows the user to choose the file and start the job.
- The printer follows the file instructions to build the object along with its required support structures layer by layer over several hours.
Removing the model from the bed
After the printing process finishes, the model remains firmly stuck to the flat print bed. A flat tool called a scraper is used to free the object without damaging the machine. The user holds the print tightly with one hand and gently pushes the scraper against the bottom base of the model. Light pressure separates the plastic from the surface so the print can be lifted and placed onto a cut-proof mat.
Trimming the supports
Complex shapes require printed support structures beneath overhangs to hold the shape during the build. Once the print is off the bed, a cutting tool called a nipper is used to snip away every piece of support material attached to the model. This trimming must be done with great care. Rushing or pulling the plastic supports forcefully can snap fragile sections or break the finished part.
Part of the course
3D Printing
More in Module 6 - Print your Super Hero
- 1Thinkverse Design & Prusa Slice4 Minutes
- 23D PrintNow playing